Remko DN 40 Manual do Utilizador descarregar pdf (Página 6)

6

REMKO 3-WAY SWITCHING VALVE DN 40

Assembly

Installation is generally possible in any

position. However, the actuator should

not be installed upside-down, as far

as possible.

■ The 3-way switching valve and the

actuator are delivered packaged

separately. At ﬁrst, leave the actuator

in the package and begin with the

hydraulic installation of the 3-way

switching valve.

Installation

Installation should only be

performed by authorised

specialists.

NOTE

Do not use any boiler accessories,

soldering material or wet materials

of a mineral oil basis, mineral oil

or hydrocarbon.

NOTE

■ Only ﬁt the actuator and make

electrical connection to the heat

pump manager after completion

of all hydraulic installation work and

successful leak test.

■ Allow for sufﬁcient space for

the 3-way switching valve.

In the process, also plan for sufﬁcient

space for the pipe insulation.

That is important on the one

hand for the problem-free ﬁtting

of the actuator and on the other hand

for any later maintenance work.

Mounting the actuator

! CAUTION

The valve may only be ﬁtted

in a horizontal or vertical

orientation. The actuator must not

be positioned under the valve block

! CAUTION

Pay attention to the ﬂow direction

before installation. (Correct position

of the axis and installation position

in accordance with the REMKO

hydraulic diagram.)

1 2 3 4 5 6 7 8 9 10 11 12

Comentários a estes Manuais

Sem comentários